Sonatest DryScan 410D Ultrasonic Composite Flaw Detector
Stock # 150610A
 
The Sonatest DryScan is the top of the line flaw detector from Sonatest, offering capabilities not found in other units. The Dryscan is one of the few units available that can do normal ultrasonic inspection, as well inspect a number of different materials, including all of the following:
 
-Wood Laminate
-Friction Material
-EB Welding
-Ceramics
-Trees (center core disease)
-HoneyComb sections in Aluminium, Stainless and Paper
-Plastics/Rubber Composites
-Root Pass Weld
-Tires
-Carbon Products
-GRP/CFRP
-Conveyor Belts
-Bonding of Dissimilar Metals
 
The unit has the capability to dry couple with materials, opening a wide array of materials for inspection. The Dryscan is compatible with a number of different scanners, and has C-scan like capabilities. The DryScan is a current unit from Sonatest, so it will have parts support for the immediate future, along with additional accessories. For more information on the DryScan, visit the Sonatest website and get yourself an amazing deal on extremely rare unit!
 
Included with sale is the Following:
-Sonatest DryScan 410D
-Sonatest LiPo Battery
-Sonatest LiPo Charger
 
 

Specifications:

The dry coupling technique offers a number of considerable advantages. For example when a wide spectrum of transmitted signals is used, many of the geometric considerations conventionally applied in ultrasonic’s can be ignored. Typically, the transmitter and receiver transducers need not be in alignment, they can be oriented at a right angle to each other. This characteristic, plus the fact that the transducer tip can be as small as 5mm diameter, enables testing to be achieved that cannot be dealt with by conventional means.

With the Dryscan technique, highly effective signal transmission can now be achieved by using a completely dry contact system. The ultrasonic energy is coupled between the transducers and the material under test by using special plastic pads on the transducers, eliminating the need for a coupling medium. Transducers can be held or they may be roller type for continuous pass scanning using various manual or automatic manipulation systems, which can be linked to C-Scan recording systems. The Dryscan 410D concept is simple to apply and requires only a minimum of operator training. This technique results in no possible hazards of radiation, contamination or degradation of the test pieces.

Advantages of the System

The main advantages of the Shadow Technique is summarized below:

  • No coupling medium is required to contact the transducers acoustically to the test material.
  • Many of the geometric considerations applied to conventional ultrasonic detection methods can be ignored.
  • The system is highly reliable for fault detection.
  • The method can be used for many materials as a GO or NO-GO system – semi – or fully automatic.
  • In many cases, materials surface preparation is not necessary.
 

Test Range: 0 – 1mm (0.05in) up to 0 – 20000 mm (800 in.) at steel velocity. Variable in 1,2,5 sequence or continuously in 1mm (0.05in) increments.

Velocity: 256 to 16000m/s continuously variable.

Probe Zero: 0 to 999.999 μs, continuously variable.

Delay: Calibrated delay from 0 -20000mm in 0.05 mm steps at steel velocity (0-400in. in 0.002 in. steps).

Gain: 0 to 110dB. Adjustable in 0.1, 0.5, 1, 2, 6, 10, 14 and 20dB steps.

Test Modes: Pulse echo and transmit/receive.

Pulser: 100V – 450V square wave pulser. Pulse width from Spike to 2500ns duration – rise/fall times <10ns into 50 ohms at 200V: Width adjustable in 2% of nominal width, minimum 1ns maximum 40ns.

ActiveEdge™ Unique active pulse control for enhanced near surface resolution and signal response.

P.R.F: Selectable 15 to 5000Hz in 5Hz steps.

Update Rate: 60Hz (NTSC Mode); 50Hz (PAL Mode).

Rectification: Full wave, positive or negative half wave and unrectified rf.

Frequency Range: 7 narrow bands centred at 0.25Mhz, 0.5MHz, 1MHz, 2.25MHz, 5MHz, 10MHz and 15MHz. Broad band at 2 MHz to 22MHz (-6dB) and 1MHz to 35 MHz (-20dB). Special Dryscan mode allowing the resonant frequency of the receiver stage of the Dryscan 410 to be adjusted between 150kHz and 1.42MHz in 10 kHz steps.

Measurement Modes

Mode 1:Signal Monitor

Mode 2:Depth and amplitude of first signal in gate.

Mode 3: Echo-to-Echo distance measurement. (single gate)

Resolution: To 0.01mm (0.001in) for distance measurement or 1% FSH for amplitude measurement. Large display of measurement at top of A-Scan display. Measurement mode selectable between peak and flank.

A-Scan Memory: Maximum of 800 waveforms can be printed or transferred to a PC using optional SDMS software.

Panel Memory: 100 stores for retaining calibrations.       

DAC: DAC defined by up to 10 points and digitally drawn on screen. DAC curves meet requirements of EN 1714, JIS and ASME standards, selectable between -2, -6, -10, -12 and -14dB. Amplitude read out selectable between % DAC, % FSH or relative dB.

 


 

 

 

Trade Ins: We offer some of the highest prices on your used test equipment. We do partial trade ins or will buy your used equipment outright. An estimated trade in value will be assessed within 24 hours of receiving a value request.
 
 
Payment terms: We accept payment prior to shipping by Visa, MasterCard, AMEX, and Paypal (up to $10.000).  Businesses and Universities, please call for payment options.  Please notify us of method of payment in a timely fashion after the auction has ended. If a buyer has not made any attempt to contact us 7 days after this auction’s end time we will assume they are forfeiting the auction and the item will no longer be available to them.
 
 
International Buyers: We reserve the right to accept or decline international Paypal and credit cards. International shipping is available, but clearing customs will often result in delivery delays.
Shipping Terms:  Buyer pays for shipping and packaging for this item. International buyers will pay for shipping charges to their country.  
 
* Shipping and handling fees are not refundable under any circumstances. In the case of a return, the buyer is responsible for all shipping fees.
* Shipping for international buyers will be invoiced separately from the purchased product due to the high expense of shipping charges.
* Your phone number is required for shipping purposes, so please provide it with all correspondence.
* Please note that calculated shipping is based on UPS.  We also reserve the right to ship for the same cost via FedEx or other carriers. 

Packaging:
  All items will be packaged with materials necessary to ensure that the equipment will be adequately protected from the shipping process.
Feedback:  We appreciate Positive feedback. We leave feedback as soon as we get feedback from you. If you have any problems with the sale, please try to resolve it with us before you leave us a Neutral or Negative feedback.

Warranty:  No warranty is expressed or implied with any unit. All sales include a 3 day right of return (ROR).  For any reason, within 72 hours of taking possession of the item, the buyer can return the item for a complete refund minus all shipping costs. 
 
Return Policy:  You can return the item for any reason within three days. We put great effort into thoroughly documenting each piece of equipment, typically with very detailed pictures and video clips.  We strongly encourage you to study these images closely before you commit to purchasing the item. Please call or email us if you have any questions about anything that you are uncertain about. It is critical that you confirm that this item suites your needs within the three day return policy period. Any returns after two weeks will not be entertained, and we will automatically escalate to Ebay. If you choose to open an Ebay return case, and we are forced to accept the return, you are responsible for the following:
 
*Return Shipping and insurance of the item to our Store at the following address:
 
GP-Technical
246 Pooler Parkway Suite E
Pooler, GA 31322
 
*A Restocking fee of 10% of the purchase price for every week (after the initial 3 day return period) that the item is in your possession, not to exceed two weeks.