Loaded & Calibrated Olympus MultiScan MS5800 E1U Tube Inspection System w/Laptop

$24,999.99

Good working condition MS5800 System for sale. This Olympus MultiScan unit comes calibrated, and includes the laptop, power and charging cables, and a transport case can be added for easy travel if required. The unit has had options added such as IRIS and ECT, and the machine performs perfectly.

Out of stock

Description

Olympus MultiScan MS5800 Tube Inspection System
Stock #220218A


Included with Sale
-MS-5800 E1U Unit
-Laptop w/Charger

**other accessories available upon request**
Specifications:
MultiScan MS5800E System - Tube Inspection with Eddy Current Testing (ECT)

• Condensers
• Feedwater Heaters
• Heat Exchangers
• Air Conditioners

ECT Applications
Eddy current testing is a noncontact method used to inspect 
nonferromagnetic tubing. This technique is suitable for detecting 
and sizing metal discontinuities such as corrosion, erosion, wear, 
pitting, baffle cuts, wall loss, and cracks in nonferrous materials.

• Two coils are excited with an electrical current, producing a 
magnetic field around them. The magnetic fields penetrate the 
tube material and generate opposing alternating currents in the 
material. These are called eddy currents.
• Any defects that change the eddy current flow also change the 
impedance of the coils in the probe.
• These changes in the impedance of the coils are measured and 
used to detect defects in the tube.

MultiScan MS5800E Key Features
• Four simultaneous frequencies per input. 
Inspection speeds up to 2 m/s with four frequencies on absolute and differential channels, without signal distortion.
• Electronic probe balancing.
No separate external reference probe is required for absolute channel operation.
• 4 ECT inputs and up to 64 multiplexed channels.
The MultiScan MS5800E system can support a large number of ECT channels to perform array probe inspections. Compared to single-channel inspection, the array probe technology enables faster and easier surface coverage.


MultiScan MS5800U System - Tube Inspection with an Internal Rotating Inspection System (IRIS) for Ferrous and Nonferrous Materials

• Boilers
• Feedwater Heaters
• Air Coolers
• Heat Exchangers

IRIS Applications
The ultrasonic IRIS option is used to inspect a wide range of materials, including ferrous, nonferrous, and nonmetallic tubing. This technique detects and sizes wall loss resulting from corrosion, erosion, wear, pitting, cracking, and baffle cuts. Olympus digital IRIS inspection technology is used as a prove up technique for remote field testing, magnetic flux leakage, and eddy current inspections.

MultiScan MS5800U (IRIS) Key Features
• Setup wizard 
Simplifies equipment calibration for different tube diameters and materials. The wizard also generates the reporting code for the inspection.
• Real-time gain and gate controls
UT settings can be modified during the C-scan acquisition for quick optimization of signal detection.
• Real-time and continuous color C-scans
Reduces missed flaws with C-scan displays. To enhance the quality and appearance of your reports, include color maps  and cross-section views of defects.
• Full tube-length recording
Used to analyze data off-line and to assess results with customers.


MultiScan MS5800R™ System - Tube Inspection with Remote Field Testing (RFT)

• Boilers
• Feedwater heaters
• Carbon steel heat exchangers

Remote Field Testing Applications
Remote field testing (RFT) is being used to successfully inspect ferromagnetic tubing such as carbon steel or ferritic stainless steel. This technology offers good sensitivity when detecting and measuring volumetric defects resulting from erosion, corrosion, wear, and baffle cuts.
Olympus remote field probes and the MultiScan MS5800 are used all around the world to successfully inspect heat exchangers, feedwater heaters, and boiler tubes.

MultiScan MS5800R Key Features (RFT)
• RFT with up to four different frequencies and real-time mixes.
This feature provides more flexibility for mixing and defect validation. The detection and sizing of flaws at the support plate is made easier with multifrequency inspections and dual-driver operations.
• RFT with frequencies ranging from 20 Hz to 250 kHz.
The high frequency available with the MultiScan MS5800R™ extends RFT inspection to thin materials with low permeability, such as 400-series stainless steel, and other ferromagnetic alloys.

Tube Inspection with Near-Field Testing (NFT)
• Air coolers
• Carbon steel heat exchangers

Near-Field Testing Applications
Near-field testing (NFT) technology is a fast, cost-effective solution intended specifically for fin-fan carbon-steel tubing inspection. This new technology relies on a simple driver-pickup eddy current probe design, providing very simple signal analysis. NFT is specifically suited to the detection of internal corrosion, erosion, or pitting on the inside of carbon steel tubing. The NFT probes measure lift-off or “fill factor” and convert it to amplitude-based signals (no phase analysis). Because the eddy current penetration is limited to the inner surface of the tube, NFT probes are not affected by the fin geometry on the outside of the tubes.

MultiScan MS5800R™ System Tube Inspection with Magnetic Flux Leakage (MFL)
• Feedwater heaters
• Air coolers
• Carbon steel heat exchangers

Magnetic Flux Leakage Applications
Magnetic flux leakage (MFL) is a fast inspection technique, suitable for measuring wall loss and detecting sharp defects such as pitting, grooving, and circumferential cracks. MFL is effective for aluminum-finned carbon steel tubes, because the magnetic field is almost completely unaffected by the presence of the fins.


Complete Heat Exchanger Tubing Inspection Solution

MS5800, MultiView, and TubePro Software: The Ultimate Combination. 

• Features acquisition, analysis and reporting.
• Multiple technologies: ECT, RFT, NFT, MFL (all with array capabilities), IRIS.
• Offers advanced user-editable reporting featuring 2-D tube maps and impressive 3-D drawings.
• Has an easy-to-use interface with improved controls.
--------------------------------------------------
Trade Ins: We offer some of the highest prices on your used test equipment. We do partial trade ins or will buy your used equipment outright. An estimated trade in value will be assessed within 24 hours of receiving a value request.


Payment terms: We accept payment prior to shipping by Visa, MasterCard, AMEX, and Paypal (up to $10.000).  Businesses and Universities, please call for payment options.  Please notify us of method of payment in a timely fashion after the auction has ended. If a buyer has not made any attempt to contact us 7 days after this auction's end time we will assume they are forfeiting the auction and the item will no longer be available to them.


International Buyers: We reserve the right to accept or decline international Paypal and credit cards. International shipping is available, but clearing customs will often result in delivery delays.

Shipping Terms:  Buyer pays for shipping and packaging for this item. International buyers will pay for shipping charges to their country.  
 
* Shipping and handling fees are not refundable under any circumstances. In the case of a return, the buyer is responsible for all shipping fees.
* Shipping for international buyers will be invoiced separately from the purchased product due to the high expense of shipping charges.

* Your phone number is required for shipping purposes, so please provide it with all correspondence.

* Please note that calculated shipping is based on UPS.  We also reserve the right to ship for the same cost via FedEx or other carriers. 


Packaging: All items will be packaged with materials necessary to ensure that the equipment will be adequately protected from the shipping process.

Feedback:  We appreciate Positive feedback. We leave feedback as soon as we get feedback from you. If you have any problems with the sale, please try to resolve it with us before you leave us a Neutral or Negative feedback.

Warranty: No warranty is expressed or implied with any unit. All sales include a 3 day right of return (ROR).  For any reason, within 72 hours of taking possession of the item, the buyer can return the item for a complete refund minus all shipping costs. 


Return Policy:  You can return the item for any reason within three days. We put great effort into thoroughly documenting each piece of equipment, typically with very detailed pictures and video clips.  We strongly encourage you to study these images closely before you commit to purchasing the item. Please call or email us if you have any questions about anything that you are uncertain about. It is critical that you confirm that this item suites your needs within the three day return policy period. Any returns after two weeks will not be entertained, and we will automatically escalate to Ebay. If you choose to open an Ebay return case, and we are forced to accept the return, you are responsible for the following:

*Return Shipping and insurance of the item to our Store at the following address:

*A Restocking fee of 10% of the purchase price for every week (after the initial 3 day return period) that the item is in your possession, not to exceed two weeks. 



Reviews

There are no reviews yet.

Be the first to review “Loaded & Calibrated Olympus MultiScan MS5800 E1U... ”

Your email address will not be published.

four + twenty =