Mentor EM
More experience in every inspection.
Remotely collaborate with experts in real time. Introducing Mentor EM for eddy current weld inspection.
This powerful new technology makes eddy current weld inspections easier, more accurate, and faster. By allowing the workflows to be instantly accessible on the device, Mentor EM helps to ensure strict compliance with codes, guidelines, and standard practices.
Transforming Nondestructive Testing
• Portable eddy current testing instrument with industry-defining signal-to noise ratio
• Reduces need for paper and manuals
• Large, bright, high-definition touchscreen that can be used while wearing gloves
• No knobs, dials, or switches to mistakenly adjust during use
• Superior IP rating and rugged cast magnesium housing to withstand harsh work environments
• Multiple alarm gates, which can be set to color or sound, to warn of possible defects
Specifications:
Battery Size: 62 watt-hours/air transport compliant
Battery Life:
4 hours for most conditions
90-minute charge time
Extended battery pack adds 6 hours
Generators:
2 generators and 2 connectors
2 time slices max per generator
4 frequency simultaneous injection
Display: 10.4" XVGA 1024 x 768 Projected capacitive touch
Frequency Range: 10 Hz–6 MHz
Sample Rate: (max) 50 kHz
Receiver Gain: 0–34 dB
Gain: 0–120 dB in 0.1 dB steps
Drive Voltage: 0.5, 1, 2, 4, 8, and 16 VPP
Gates Output: 2 per channel
Alarm Outputs: 2 total, TTL levels, one per input. One LED on instrument face, audio through Bluetooth (headset protocol)
Operating Temperature: -20 to 55°C
Storage: 8 GB SSD
Connectivity: Wi-Fi; 6 Bluetooth channels
Dimensions: 2.5 kg without modules; 295 mm x 230 mm x 60 mm2.9 kg with 2-probe connector module and connectivity module
Image Formats: BMP, JPG
Video Formats: MPEG 4, Type 10
Instantly Collaborate and Access Information
• Connect to local network to share data and collaborate remotely with experts in real time
• Immediately download the most up-to-date procedures and workflows
• Bluetooth enabled
Mentor Create Software
• Tailor on-device inspection workflow applications for technicians of all levels
• Aid inspectors by placing photos, procedures, and videos on device for reference while setting up, acquiring data, or analyzing data
• Limit range of adjustments available to the operator; and therefore limit the opportunity to make errors
• Use in “Expert Mode” as well as “Workflow-on-Device” mode
Reviews
There are no reviews yet.